South Carolina · 2026 cost guide
How much does a concrete driveway cost in South Carolina?
In South Carolina, a concrete driveway costs about $2,800–$7,800 in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly $4.6–$12.88 per square foot. That’s about 8% below the U.S. average.
Estimate your South Carolina project with the Concrete Calculator →
South Carolina cost breakdown
| Typical total (a 600 sq ft (20×30) 4-inch-thick concrete driveway) | $2,800–$7,800 |
| Per square foot | $4.6–$12.88 |
| Metro areas (Charleston, Columbia, and Greenville) | up to ~$8,400 |
| Versus U.S. average | about 8% below average |
What’s different about South Carolina
South Carolina's coast faces hurricane wind codes, and humid, subtropical conditions statewide increase exterior wear and moisture management costs.
- Coastal wind codes can require stronger materials and fastening.
- Humidity favors moisture- and mildew-resistant materials.
Expect quotes toward the higher end in South Carolina’s larger metros — Charleston, Columbia, and Greenville — where labor and permit costs run above the state average, and lower in rural areas.
How the cost is built
Concrete driveway cost depends on square footage, slab thickness, and finish — a plain broom finish is cheapest, while stamped or colored concrete costs more. Site prep, removal of an old slab, reinforcement, and thicker pours for heavy vehicles add to the total.
Frequently asked questions
How much does a concrete driveway cost in South Carolina?
In South Carolina, a concrete driveway costs about $2,800 to $7,800 in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly 4.6–12.88 per square foot. That's about 8% below the national average, reflecting local labor and material costs.
What affects the cost of a concrete driveway in South Carolina?
South Carolina's coast faces hurricane wind codes, and humid, subtropical conditions statewide increase exterior wear and moisture management costs. Coastal wind codes can require stronger materials and fastening.
How can I get an accurate concrete driveway estimate for my home?
Use the free Concrete Calculator to plug in your real measurements and materials, then collect two or three local quotes to compare. Within South Carolina, prices run higher in metros like Charleston, Columbia, and Greenville and lower in rural areas.
Concrete driveway cost by city in South Carolina
Concrete driveway cost in nearby states
Keep planning
Related calculators
Estimate gallons of paint for walls and ceilings from room size, coats, and openings.
Open calculator →ConstructionDrywall CalculatorEstimate sheets of drywall plus screws, joint compound, and tape from your wall area.
Open calculator →ConstructionMulch & Gravel CalculatorCalculate cubic yards and bags of mulch, gravel, or topsoil for any bed depth.
Open calculator →Sources & method
The South Carolina figure is the national installed-cost range scaled by a South Carolina regional cost index (its construction costs run about 8% below the U.S. average), then adjusted for the local climate and code factors above. It’s a 2026 planning estimate, not a quote — get local bids before budgeting.
- Smart Cost Hub methodology — how our cost ranges and indices are built
- U.S. Bureau of Labor Statistics — Producer Price Index (construction materials)