=Smart Cost Hub

2026 cost guide

How much does a concrete driveway cost?

Pouring a concrete driveway costs about $3,000–$8,500 nationally in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly 5–14 per square foot. Costs run lower in Mississippi and higher in Hawaii; see your state below.

Estimate your project with the Concrete Calculator →

What drives the cost

Concrete driveway cost depends on square footage, slab thickness, and finish — a plain broom finish is cheapest, while stamped or colored concrete costs more. Site prep, removal of an old slab, reinforcement, and thicker pours for heavy vehicles add to the total.

Concrete driveway cost by state (2026)

Concrete driveway typical cost in selected U.S. states, 2026Hawaii$8,450California$7,500New York$7,400Washington$6,600Texas$5,500Ohio$5,400Georgia$5,350Mississippi$4,900
Typical mid-range a concrete driveway cost across selected states (2026 estimate).
StateTypical rangePer square foot
Alabama$2,600–$7,500$4.4–$12.32Details →
Alaska$3,800–$11,000$6.4–$17.92Details →
Arizona$2,900–$8,200$4.85–$13.58Details →
Arkansas$2,600–$7,300$4.3–$12.04Details →
California$4,000–$11,000$6.6–$18.48Details →
Colorado$3,200–$9,000$5.3–$14.84Details →
Connecticut$3,500–$10,000$5.9–$16.52Details →
Delaware$3,100–$8,800$5.15–$14.42Details →
District of Columbia$3,800–$10,500$6.25–$17.5Details →
Florida$2,900–$8,300$4.9–$13.72Details →
Georgia$2,800–$7,900$4.65–$13.02Details →
Hawaii$4,400–$12,500$7.25–$20.3Details →
Idaho$2,900–$8,100$4.75–$13.3Details →
Illinois$3,200–$9,200$5.4–$15.12Details →
Indiana$2,800–$7,800$4.6–$12.88Details →
Iowa$2,700–$7,700$4.5–$12.6Details →
Kansas$2,600–$7,500$4.4–$12.32Details →
Kentucky$2,700–$7,600$4.45–$12.46Details →
Louisiana$2,700–$7,700$4.55–$12.74Details →
Maine$3,100–$8,800$5.2–$14.56Details →
Maryland$3,400–$9,500$5.6–$15.68Details →
Massachusetts$3,700–$10,500$6.2–$17.36Details →
Michigan$2,900–$8,200$4.8–$13.44Details →
Minnesota$3,200–$8,900$5.25–$14.7Details →
Mississippi$2,600–$7,200$4.25–$11.9Details →
Missouri$2,700–$7,700$4.5–$12.6Details →
Montana$2,900–$8,300$4.9–$13.72Details →
Nebraska$2,700–$7,600$4.45–$12.46Details →
Nevada$3,100–$8,800$5.2–$14.56Details →
New Hampshire$3,200–$9,100$5.35–$14.98Details →
New Jersey$3,500–$9,900$5.8–$16.24Details →
New Mexico$2,800–$7,800$4.6–$12.88Details →
New York$3,800–$11,000$6.35–$17.78Details →
North Carolina$2,800–$7,900$4.65–$13.02Details →
North Dakota$2,800–$8,000$4.7–$13.16Details →
Ohio$2,800–$8,000$4.7–$13.16Details →
Oklahoma$2,600–$7,400$4.35–$12.18Details →
Oregon$3,300–$9,400$5.5–$15.4Details →
Pennsylvania$3,100–$8,700$5.1–$14.28Details →
Rhode Island$3,400–$9,700$5.7–$15.96Details →
South Carolina$2,800–$7,800$4.6–$12.88Details →
South Dakota$2,700–$7,700$4.55–$12.74Details →
Tennessee$2,700–$7,700$4.55–$12.74Details →
Texas$2,900–$8,100$4.75–$13.3Details →
Utah$3,000–$8,400$4.95–$13.86Details →
Vermont$3,200–$9,000$5.3–$14.84Details →
Virginia$3,000–$8,600$5.05–$14.14Details →
Washington$3,400–$9,800$5.75–$16.1Details →
West Virginia$2,700–$7,600$4.45–$12.46Details →
Wisconsin$2,900–$8,300$4.9–$13.72Details →
Wyoming$2,800–$7,900$4.65–$13.02Details →

Frequently asked questions

How much does a concrete driveway cost on average?

Nationally, pouring a concrete driveway costs about $3,000 to $8,500 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly 5–14 per square foot. Your actual price depends on size, materials, and local labor rates.

Which states are cheapest and most expensive for a concrete driveway?

Labor and material costs are lowest in states like Mississippi and highest in states like Hawaii, where the same project can cost 40–60% more. Use the table below to see the estimate for your state.

What affects the cost of a concrete driveway?

Concrete driveway cost depends on square footage, slab thickness, and finish — a plain broom finish is cheapest, while stamped or colored concrete costs more. Site prep, removal of an old slab, reinforcement, and thicker pours for heavy vehicles add to the total.

Sources & method

Each state estimate is the national installed-cost range adjusted by a regional cost index that reflects local construction labor and material costs. Figures are 2026 planning estimates, not quotes — confirm with local bids.