Alabama · 2026 cost guide
How much does a concrete driveway cost in Alabama?
In Alabama, a concrete driveway costs about $2,600–$7,500 in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly $4.4–$12.32 per square foot. That’s about 12% below the U.S. average.
Estimate your Alabama project with the Concrete Calculator →
Alabama cost breakdown
| Typical total (a 600 sq ft (20×30) 4-inch-thick concrete driveway) | $2,600–$7,500 |
| Per square foot | $4.4–$12.32 |
| Metro areas (Birmingham, Huntsville, and Montgomery) | up to ~$8,100 |
| Versus U.S. average | about 12% below average |
What’s different about Alabama
Alabama's humid climate and Gulf-influenced storms push up exterior maintenance, while contractor licensing through the state board adds permit and labor overhead.
- Humidity favors moisture- and mildew-resistant materials.
- Severe-storm exposure favors impact-resistant materials.
Expect quotes toward the higher end in Alabama’s larger metros — Birmingham, Huntsville, and Montgomery — where labor and permit costs run above the state average, and lower in rural areas.
How the cost is built
Concrete driveway cost depends on square footage, slab thickness, and finish — a plain broom finish is cheapest, while stamped or colored concrete costs more. Site prep, removal of an old slab, reinforcement, and thicker pours for heavy vehicles add to the total.
Frequently asked questions
How much does a concrete driveway cost in Alabama?
In Alabama, a concrete driveway costs about $2,600 to $7,500 in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly 4.4–12.32 per square foot. That's about 12% below the national average, reflecting local labor and material costs.
What affects the cost of a concrete driveway in Alabama?
Alabama's humid climate and Gulf-influenced storms push up exterior maintenance, while contractor licensing through the state board adds permit and labor overhead. Humidity favors moisture- and mildew-resistant materials.
How can I get an accurate concrete driveway estimate for my home?
Use the free Concrete Calculator to plug in your real measurements and materials, then collect two or three local quotes to compare. Within Alabama, prices run higher in metros like Birmingham, Huntsville, and Montgomery and lower in rural areas.
Concrete driveway cost by city in Alabama
Concrete driveway cost in nearby states
Keep planning
Related calculators
Estimate gallons of paint for walls and ceilings from room size, coats, and openings.
Open calculator →ConstructionDrywall CalculatorEstimate sheets of drywall plus screws, joint compound, and tape from your wall area.
Open calculator →ConstructionMulch & Gravel CalculatorCalculate cubic yards and bags of mulch, gravel, or topsoil for any bed depth.
Open calculator →Sources & method
The Alabama figure is the national installed-cost range scaled by a Alabama regional cost index (its construction costs run about 12% below the U.S. average), then adjusted for the local climate and code factors above. It’s a 2026 planning estimate, not a quote — get local bids before budgeting.
- Smart Cost Hub methodology — how our cost ranges and indices are built
- U.S. Bureau of Labor Statistics — Producer Price Index (construction materials)