South Carolina · 2026 cost guide
How much does a tile roof cost in South Carolina?
In South Carolina, a tile roof costs about $14,500–$37,000 in 2026 for a 1,800 sq ft clay or concrete tile roof, tear-off included — roughly $920–$2024 per square (100 sq ft). That’s about 8% below the U.S. average.
Estimate your South Carolina project with the Roofing Square Calculator →
South Carolina cost breakdown
| Typical total (a 1) | $14,500–$37,000 |
| Per square (100 sq ft) | $920–$2024 |
| Metro areas (Charleston, Columbia, and Greenville) | up to ~$40,000 |
| Versus U.S. average | about 8% below average |
What’s different about South Carolina
South Carolina's coast faces hurricane wind codes, and humid, subtropical conditions statewide increase exterior wear and moisture management costs.
- In hurricane zones, tile must be foam-set or screwed down to meet wind codes.
- Humidity favors moisture- and mildew-resistant materials.
Expect quotes toward the higher end in South Carolina’s larger metros — Charleston, Columbia, and Greenville — where labor and permit costs run above the state average, and lower in rural areas.
How the cost is built
Tile-roof cost is driven by material (concrete tile is cheaper than clay or slate), roof pitch, and structural needs — tile is heavy, so framing sometimes has to be reinforced. Tile lasts 50+ years and excels in hot, sunny climates but costs more to install than asphalt or metal.
Frequently asked questions
How much does a tile roof cost in South Carolina?
In South Carolina, a tile roof costs about $14,500 to $37,000 in 2026 for a 1,800 sq ft clay or concrete tile roof, tear-off included — roughly 920–2024 per square (100 sq ft). That's about 8% below the national average, reflecting local labor and material costs.
What affects the cost of a tile roof in South Carolina?
South Carolina's coast faces hurricane wind codes, and humid, subtropical conditions statewide increase exterior wear and moisture management costs. In hurricane zones, tile must be foam-set or screwed down to meet wind codes.
How can I get an accurate tile roof estimate for my home?
Use the free Roofing Square Calculator to plug in your real measurements and materials, then collect two or three local quotes to compare. Within South Carolina, prices run higher in metros like Charleston, Columbia, and Greenville and lower in rural areas.
Tile roof cost by city in South Carolina
Tile roof cost in nearby states
Keep planning
Related calculators
Estimate roof replacement cost and what a storm-damage insurance claim is likely to net after depreciation and deductible.
Open calculator →ConstructionGutter CalculatorEstimate total gutter run, downspouts, hangers, and 10-ft sections from your footprint and roof style.
Open calculator →ConstructionSiding CalculatorEstimate wall area, siding squares, and boxes to order from footprint, stories, gables, and openings.
Open calculator →Sources & method
The South Carolina figure is the national installed-cost range scaled by a South Carolina regional cost index (its construction costs run about 8% below the U.S. average), then adjusted for the local climate and code factors above. It’s a 2026 planning estimate, not a quote — get local bids before budgeting.
- Smart Cost Hub methodology — how our cost ranges and indices are built
- U.S. Bureau of Labor Statistics — Producer Price Index (construction materials)
- Roof Quotes Near Me — local South Carolina contractor quote data